Showing: 1 - 1 of 1 RESULTS

For some reason every time I try to print something, I get a blank page. I can hear the ink going back and forth over the paper but nothing is printed onto it. I've cleaned the headers, put new cartridges in and made sure everything is correctly plugged in.

The printers not that old and I'm not getting any errors pop-up on me at any time during the printing. It's not the foil on the catridges because the other cartridges worked fine for a while but the colour slowly got weaker and then stopped coming out completely.

I changed the cartridges thinking it was a problem with them but clearly it's not. I use to have the same problem with my Lexmark printer. Maybe you should check to see if the ink became clogged. Just hold the ink cartridge over boiling water for about 4 minutes or so. Also are you sure the contacts and those things are not damaged? Knowing what printer and OS you are using would help. Some thing to try is do a test page from the printer itself.

If it doesn't print then you need to reset the static head. Depending on the printer you can do it from there or you may need to go into control panel and go to printer properties and try to reset your spooler and head from there depending on your software.

Anyone know what's going on? Answer Save. Fallout 6 years ago Report. Did you take the little foil tabs off the cartridges before you installed them? Still have questions? Get your answers by asking now.Clogged nozzles - Brother printers. Brother printers have a built-in, permanent printhead.

While this allows Brother to use a very high quality printhead, anyone who has replaced the printhead after warranty found out real quick that a new printhead costs more than a new printer! Whether you use original Brother cartridges or compatible Brother cartridges, there WILL come a day when a few or even many nozzles will be blocked and the cleaning cycles will not solve the problem.

It is not whether it will happen, but most likely when. It is important to understand the problem and why it happens. You just put in a new cartridge and a few nozzles are missing. You run several cleanings, no improvement, or more times than not, the problem is worse Don't blame the cartridge, it is just a box of ink and unless the manufacturer has used the wrong ink which is very unlikely these days then you have just been introduced to the number 1 problem for Brother printer owners.

After 8 or 10 cleans, like a miracle, it starts to print properly Unfortunately the next morning the problem is even worse than it was! How can this be? Now I've got to run several cleanings every time I want to print and sometimes even this doesn't help. Now my ink cartridges last half as long. It's just got to be poor quality cartridges?!

And don't forget, 8 or 10 cleanings can use half the ink in the cartridge so you will definitely get fewer pages from a cartridge if you run many cleanings. Virtually all compatible cartridges contain at least as much ink as an original; in some cases more. The above scenario can happen at any time, but it most often happens when changing a cartridge or if the printer has not been used for an extended period of time.

Why does it Happen? Brother printers have become quite dependable on informing you when you must replace the cartridges. Seldom will a cartridge actually run out of ink before the printer stops and won't printing again until a new cartridge has been put in. So the days of running a cartridge dry, and in turn the printhead is pretty much gone. If you've been using your printer on a regular basis then most often the problem can arise when you are replacing a cartridge.

If you do run a cartridge dry, then air can get in the nozzles which will block the siphoning action required for the ink to flow through the printhead.

There's no ink coming out my printer?

To overcome this problem when a new cartridge is put in, your Brother printer will do a priming.Have had issues with connectivity since upgrading to Windows Haven't used printer in a couple of months. This am I was able to re-establish connectivity and downloaded new software.

Now the printer "prints" but nothing is on the paper. Checked ink supply-says it is adequate. Tried "cleaning"-still nothing on the paper. Go to Solution. Had already tried all suggestions except for replacing the cartridges prior to posting-how likely is it that both would be bad? Started to print just pail yellow and showed low black ink.

Cartridge replaced and now there is nothing on the paper. Sounds like its printing, paper comes through blank. Color cartidge also looks like it is full.

no ink coming out of printer

Tried head cleaning and cleaning contacts, Nothing. Then got message to say needed print alignment. Printed out page and put it on glass screen face down as requested and pressed 'scan'. Message came that it didn't recognise page. Since then it only prints blank pages. No ink black or colour. Hello, Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date.Reference Guide.

The Printer Prints Nothing The printer is not correctly connected to the computer Your EPSON printer is not selected as the default printer Printer port setting does not match the printer connection port The printer driver does not have enough available memory Macintosh The printer sounds like it is printing, but nothing prints The printer is not correctly connected to the computer Try one or more of these solutions:.

Turn off the printer and computer. Make sure the printer's interface cable is securely plugged into the correct terminal of the computer. Make sure the interface cable specifications match the specifications for the printer and computer. Make sure the interface cable is directly connected to the computer without passing through any device, such as a printer switching device, or extension cable.

For Windows NT 4. Follow the messages on the screen. Select Set As Defaultthen close the Printers window. For Macintosh: Click Apple menu and select Chooser. Printer port setting does not match the printer connection port If you use Windows, select the printer port as described below. Click the Details tab. Make sure that your printer driver is selected in the Print using the following driver list. Then select the port to which your printer is connected in the Print to following port list.

For Windows or NT 4. Click the Ports tab. Make sure that your printer port is selected. The printer driver does not have enough available memory Macintosh To increase the available memory in your Macintosh, select Control Panel from the Apple menu and double-click the Memory icon. You can increase the size of RAM cache or virtual memory to increase total available memory. Also quit all unnecessary applications. The printer sounds like it is printing, but nothing prints Try one or more of these solutions:.

Unclog Brother Inkjet Printhead Nozzles

Run the Head Cleaning utility. If the Head Cleaning utility does not work, replace the ink cartridges. See Replacing Ink Cartridges. Click Apple menu and select Chooser. Version 1.I'm hoping that this printer, which hasn't been used in years, still works.

no ink coming out of printer

The fax works. And the scanner works. But when I try to print, not even the slightest ink smudge will make it onto the page. The printer will take in the page and it sounds like it's going back and forth printing text, but each time no ink whatsoever comes makes it onto the page. The printer says I have low black and white ink, but a full cartidge of color ink. My question is: Is there a chance this printer will still print? Again, this printer hasn't been used in years, so perhaps the ink in the cartridges have dried up or reached their expiration date?

If anyone thinks I still have a chance to get this thing printing, please let me know. Go to Solution. I think there is a high liklihood that the printer will work again. You may need to replace the ink cartridges.

There are some ink cartridge cleaning routines that you can do as described in this document. Since the faxing and scanning works and the printer moves the page through as if it is printing - it seems like the mechanism is fine. The ink cartridges used in this printer have the ink supply and printhead built into the cartridge. So, when you replace it - it is all new. You will want to weigh the price of new cartridges as compared to a new printer that will come with ink and have a warranty.

I can't guarantee the printer will work - so it is a risk. Didn't find what you were looking for? Ask the community or Ask the Virtual Agent.

no ink coming out of printer

Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again. All forum topics Previous Topic Next Topic. New member. Message 1 of 5. HP Recommended. Product: Officejet J Tags 2. Tags: Mac OS X Level 8. Message 2 of 5.During these challenging times, we guarantee we will work tirelessly to support you.

We will continue to give you accurate and timely information throughout the crisis, and we will deliver on our mission — to help everyone in the world learn how to do anything — no matter what. Thank you to our community and to all of our readers who are working to aid others in this time of crisis, and to all of those who are making personal sacrifices for the good of their communities.

We will get through this together. Updated: March 29, References.

no ink coming out of printer

If you've ever had a printer not one of those super old ones that hasn't been in use for a couple of months or even a year or two! Further, there are multiple types of cartridges with different construction, so you might need another method or even to use something different. This article refers mostly to printers used by general home consumers classified as "Drop on Demand" DOD.

Unclogging it isn't very complicated, but can get messy so make sure to read the tips and steps before you begin! Log in Facebook Loading Google Loading Civic Loading No account yet? Create an account. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. As the COVID situation develops, our hearts ache as we think about all the people around the world that are affected by the pandemic Read morebut we are also encouraged by the stories of our readers finding help through our site.

Article Edit. Learn why people trust wikiHow. To create this article, 11 people, some anonymous, worked to edit and improve it over time. This article has also been viewedtimes. Learn more Explore this Article Water Method. The Vacuum Method. The Last Resort Method. Tips and Warnings. Things You'll Need. Related Articles. Method 1 of I am having trouble with hp deskjet printer.

Have you recently installed any new print cartridges? Have you not used the printer for quite some time? Have you got the correct drivers installed?

Fixing the Epson 'Prints Blank Pages' Problem

Hi Xlphos Thanks for your reply. I have not used it since long time and i installed new cartridges and the driver is right. It works and prints but the printed page in blank means without ink. Don't know why Anyway thanks and waiting for the feedback. Did you remove all the plastic covering from the cartridges? Take them out and check there are no bits of plastic left and make sure you don't touch any of the print nozzles.

Hi dear thanks for your reply. The printer software is showing ink is full for both cartridges. And there are no bits of plastic left as well. Okay have you tried cleaning the printer cartridges? The Printer software should have an option to clean the printer heads or something like that.

I have had good luck in these situations by removing the cartridges and briefly dipping them in water. Have a paper towel handy to wipe them off. Be sure to print something at least once a week to keep the cartridges wet. I have the same problem on a Canon Pixma iP New ink cartridge that are definitely not dried - ink comes out when put on a tissue - but NOTHING prints although it sounds normal when printing I had the same problem on my hp photosmart b New cartridges, printer is no more than 4 months I fixed mine by dipping a q-tip in rubbing alcohol and cleaning the inside of the printer where the ink would come out onto the paper, if that makes sense.

My printer was clogged. Problem solved! Same problem on hp photosmart C Ran out of color a day or two ago and out of black ink this morning. Pressed ink end of both cartridges several times onto a folded paper towel 4 layers moistened with water until cartridge started leaving an ink print and I could see all 3 colors on the color cartridge.

Tap cartridges on dry paper towel to remove any remaining water. Reinstalled and works perfectly! It starts printing but nothing prints on page. But i have used it before and my print was good but suddenly it stop printing and sudden started but now problem is it not print nothing on page.

Printer Ink Secret, Revealed!

MY os is windows7 bit all driver installed but i can't print nor copy. Thanks for help. I have not used it for a year. I have the right drivers.